Alignment Systems

Showing all 12 results

  • Alignment Reliability Center

    Alignment Reliability Center

    ALIGNMENT RELIABILITY CENTER 4.0 is a Windows based software platform for PRUFTECHNIK alignment instruments.

    ALIGNMENT RELIABILITY CENTER 4.0 is a Windows based software platform for PRUFTECHNIK alignment instruments. Connected to the PRUFTECHNIK cloud, prepared alignment jobs can be send immediately via internet to every ROTALIGN touch worldwide that has a connectivity package. After the measurement, the files will be uploaded back directly into the software. Therefore, it is the perfect solution to manage your assets, track and monitor the alignment history of your machinery as trend.

    Furthermore, the measurements can be analyzed in detail.A library with customizable templates and an automatic suggestion of measurement modes for different bearings makes the alignment more than convenient. A powerful reporting capability is of course also part of the software.

    • Manage plants with an asset orientated machinery management.
    • Real-time communication via cloud to ROTALIGN touch.
    • Monitor the history and trend of the alignment status of assets.
    • Analyze measurement data in detail and report.
    • Consideration of bearing types and suggestion of adequate measurement modes.
    • Library with customizable templates for assets, couplings, industrial couplings tolerances, measurement modes and reports.
    • Coupling type optimized tolerances.
    Read moreDone
  • Cardan shaft brackets ALI

    Cardan shaft brackets ALI

    There are two different Cardan bracket sets available that cater according to the shaft rotation degree. There are two different Cardan bracket sets available that cater according to the shaft rotation degree. Cardan shafts are used to compensate for parallel misalignment (offset) between the driving and driven shaft. However, they cannot absorb angular misalignment between…

    Read moreDone
  • Compact chain-type bracket ALI

    Compact chain-type bracket ALI

    This universal bracket set contains all parts needed for quick, rigid mounting of the measurement components.

    It fits onto nearly any shaft or coupling approximately 5 mm to 500 mm or 5/8″ to 20″ in diameter. Easily mounts in less than 1 minute!

    • Stored pre-mounted in the case for instant usage.
    • Mounts on machine shaft in less than a minute.
    • Standard chains fit to shaft and coupling diameters of approx. 15 mm to 200 mm / 5/8″ to 7 7/8″
    • Readily available replacement parts.
    Features
    • Many bracket types available to suit all kinds of shafts
    • Easy assembly saves time during measurement set up
    • Stable mounting improves measurement results
    Read moreDone
  • Compact magnetic bracket ALI

    Compact magnetic bracket ALI

    FLUKE’s compact magnetic bracket allows for the fast mounting of shaft alignment equipment.

    The Fluke compact magnetic bracket ALI 2.112 set can be used for instant mounting of shaft alignment equipment onto any ferromagnetic surface. The bracket is solid and stable, but easy to adjust.

    Instant mounting on any ferromagnetic surface: just place the compact magnetic brackets
    onto coupling flanges or shaft faces and you’re all set!

    Four powerful magnets hold sensors firmly in place for measurement – even on narrow coupling flanges – yet allow extremely easy and flexible adjustment.

    Features
    • Many bracket types available to suit all kinds of shafts
    • Easy assembly saves time during measurement set up
    • Stable mounting improves measurement results

     

    Read moreDone
  • EDDYTHERM 2x

    EDDYTHERM 2x

    For fast and efficient heating and automatic demagnetization.

    The EDDYTHERM 2x induction heater is suitable for heating small and medium-sized bearings and other metallic, ring-shaped workpieces up to 80 kg. It uses the same induction principle as in transformers – its core and windings are used as the primary side, but the workpiece acts as a short-circuited secondary winding, which rapidly heats up due to its great electrical resistance.

    EDDYTHERM 2x controls the heating by continuously monitoring the workpiece temperature and adjusting its own heating power accordingly. This ensures that the workpiece is heated evenly and the selected temperature is achieved precisely. The crossbar itself remains cool to the touch.

    Features
    • Compact
    • Sturdy
    • Safe
    Read moreDone
  • EDDYTHERM Portable

    EDDYTHERM Portable

    High frequency technology for outstanding heating performance.

    Proper shrink fitting extends the life of roller bearings by several times. EDDYTHERM Portable operates in the high-frequency range to heat roller bearings with an inner diameter as small as 20 mm up to an outer diameter of 160 mm and a weight of up to 10 kg.

    The workpiece is placed onto the cone shaped heating surface. The integrated time and temperature regulation capability ensures that the workpiece is heated evenly with no risk of overheating.

     

    Features
    • Compact
    • Sturdy
    • Safe

     

    Read moreDone
  • Extra-thin bracket ALI

    Extra-thin bracket ALI

    The ideal solution to those occasional tight squeezes between coupling and machine housing.

    The ALI 2.109 set is suitable for shaft/coupling diameters from ​approx. 80 mm (3 1/8″) and up. Only 8 mm (5/16″) thick, this bracket offers an ideal solution to those occasional tight squeezes ​between coupling and machine housing. The case includes one complete set for both sides of the shaft or coupling, including various threaded rods and quick-mounting slip nuts. For shafts of diameter up to 6 5/16″.

    Features
    • Many bracket types available to suit all kinds of shafts
    • Easy assembly saves time during measurement set up
    • Stable mounting improves measurement results
    Read moreDone
  • LAMIBLOC

    LAMIBLOC

    LAMIBLOC® laminated shims​ are used wherever conventional sizes are just not enough​.

    LAMIBLOC® laminated shims​ are used wherever conventional sizes are just not enough​. LAMIBLOC are ideal when alignment work requirements are insufficient to warrant stocking the complete assortment of single-thickness shims.

    Just a handful of shims are all you need on the job site for perfect vertical alignment adjustment in a small fraction of the usual time. Each 1mm shim is composed of 20 layers, each 0.05mm thick. The user can simply peel away the shim to the required thickness for machine alignment.

    Features
    • Easy vertical machine corrections
    • Available in assortment cases or individual size packs
    • Stable and durable machine support
    Read moreDone
  • Magnetic sliding bracket ALI

    Magnetic sliding bracket ALI

    The magnetic sliding bracket ALI 2.230 is the ideal bracketing solution in cases where one or both shafts cannot be rotated.

    Shafts can’t be rotated? No problem! This bracket allows measurement and alignment to be performed when one or both shafts cannot be rotated. The magnetic sliding bracket is placed upon the back of the coupling or front corner of the uncoupled shaft and slid around from one measurement position to the next.

    Suitable for shaft/coupling diameters from approx. 80 mm (3 1/8″) on up. Bear in mind that good alignment results do depend upon a high-quality surface finish of shafts/couplings (and since the shafts are not rotated, the working axis of the machine shafts may not be determined with the same accuracy as otherwise). Delivered individually: order 2 pieces if neither shaft can be rotated.

    Features
    • Many bracket types available to suit all kinds of shafts
    • Easy assembly saves time during measurement set up
    • Stable mounting improves measurement results
    Read moreDone
  • OPTALIGN touch

    OPTALIGN touch

    OPTALIGN touch is an easy-to-use device for daily alignment jobs.

    Everybody can use this alignment tool since the touchscreen computer is guiding the user intuitively through the measurement program. The bright and colorful touchscreen display combined with the powerful computer on the inside make hard jobs easy without lacking any precision.

    The new OPTALIGN touch alignment system consists of the touch handheld device and the PRUFTECHNIK sensALIGN 5 sensor/laser heads. This great combination opens up the world of full wireless connectivity via WiFi and cloud-based file transfer.

    Read moreDone
  • PARALIGN Service

    PARALIGN Service

    PARALIGN is a unique inertial alignment system that contains three high-precision laser gyroscopes as used in the navigation of wide-bodied jets and submarines.

    PARALIGN ‘learns’ the ideal position of the rollers on a reference roller or plate. Simply by placing the system on the next roller surface, the actual position of the individual roller is compared with the ideal alignment and the deviation is shown immediately as a graphical and numerical information on the display. The data is transmitted wirelessly to a laptop.

    A side view of the machine is shown, with the deviations of every measured roller from its ideal position graphically and numerically displayed.   PARALIGN is the better way for roll alignment: fast, efficient and highly accurate, even without line of sight. See “Additional Info” for a wealth of literature on different industrial and manufacturing applications and uses for PARALIGN.

    Read moreDone
  • PERMABLOC

    PERMABLOC

    PERMABLOC shims are up to 400% more cost-effective than hand-cut shims. PERMABLOC shims both reduce labour cost during installation and repair, and assist inventory control.

    PERMABLOC also helps avoid risk of injury when the sharp-edged shims are cut and inserted.

    • Bur-free for higher accuracy in machinery alignment.
    • Four machine foot sizes, eight thicknesses.
    • Corrosion-resistant high-quality stainless steel.
    • Time-saving permanent thickness / dimension marking.
    • No ‘leaf spring’ effect from stacked shims: only 3 shims are enough!
    • Perfectly flat for stable, consistent machine support.
    • Perforated tab for easier positioning and removal​
    Features
    • Easy vertical machine corrections
    • Available in assortment cases or individual size packs
    • Stable and durable machine support
    Read moreDone